Dobinsons Front Upper Control Arm Kit (UCA’s) for Toyota Land Cruiser 200 Series and Lexus LX570 2008 to 2021(UCAKIT-001K)

Description

• Complete kit for both left and right hand side, includes new ball joints (Pressed), OE style rubber frame bushings (installed), and washers
• Has 3 degrees of caster built in, no adjustability or settings required
• Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
• Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
• Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
• For replacement ball joints click(HERE)
• For replacement bushings click (HERE)
• Includes:
• UCA59-001K (Pair)
• BJ59-001 (Pair)
• Pressing Service

Instructions

—
Dobinsons front upper control arm set. This will ONLY work on a vehicle lifted 1.5″ or more, due to the built-in 3 degrees of caster. This will fit Toyota Land Cruiser 200 Series 2008 to 2019 and Lexus LX570 2008 to 2019. These will be noise-free as they use rubber bushings and a factory style ball joint. No greasing is necessary.